Turn on the printer and remove all the cartridges then unplug the printer cord from the printer
Next, unplug from the wall outlet (Wait 30 sec)
Insert the wall plug back into the wall outlet first
Next, plug the printer cable back into the printer
(This will correct any error messages)
Touchscreen Models-Disable Firmware
Tap on the Home key
Next Tap on Setup or Settings (OK)
Click Notification to (OFF)
Your printer will no longer receive any future updates. However, it depends on the firmware version that was previously install into your printer if your old compatible cartridges or refills will work. BMC TONER SOLUTION only sells the latest version of chips. Every cartridge has a chip that will read that it is original cartridge, ink levels, and correct color. If one color is out the unit will stop printing. You can tap on the ink level screen to display which colors need to be changed. Also, do not try to stop the cradle. Please wait for it to stop and gently press the cartridges to be removed otherwise the slots can be damaged inside the cradle. All cartridges must have the same version of chips when installing.
If you have error message one or more cartridge is missing or damage then your firmware has damage the cartridges chips.
Disable Firmware-EPSON WF PRINTER MODELS
Lower right software update (NO)
Lower Left Auto Updater
Select Never to All
Copyright © 2021 BMC TONER SOLUTIONS - All Rights Reserved.
Powered by GoDaddy Website Builder